CCTV Tester Pro Bedienungsanleitung PDF herunterladen (Seite 24)

CCTV tester PRO User’s Manual

Page.23.

Manual range： 0.000mA  6.6mA range

00.00mA  66mA range

000.0mA  660mA range

00.00A  10A range（use 10A socket）

c. Connect test leads in series with the load under measurement.

d. You can get reading from LCD.

NOTE:

 When only the figure “OL” is displayed, it indicates overrange situation and the higher range has

to be selected.

 When the value scale to be measured is unknown beforehand, set the range selector at the highest

position.

 The maximum current of mA socket is 660mA, over-current will destroy the fuse, and will damage

the meter.

 The maximum current of 10A socket is 10A, over-current will destroy the meter, and will damage

the operator.

E. Resistance Measuring

a. Connect the black test lead to the COM jack and the red test lead to theΩ jack.

b. Press to selectΩ , enter theΩ measurement. Auto range by press key, and

Manual range by press .

Manual range：(connect the red lead to black leads, will display the measure range)

000.0Ω  660Ω range

0.000 KΩ  6KΩ range

00.00 KΩ  66KΩ range

WARNING!

When measuring in-circuit resistance, be sure the circuit under test has all power removed and

that all capacitors have discharged fully.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31

Keine Kommentare

CCTV Tester Pro Bedienungsanleitung Seite 24